Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

AT&T 8125
Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 848694)

Passive Holder With Tilt Swivel for AT&T 8125
Reference ID: 8443.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 848694.
Fitment: AT&T 8125 For USA.

Price:

£ 21.89
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in a horizontal open position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

This Product is also Compatible with the Following 3 Devices :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for AT&T 8125:

Please read all instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.

3. Place the holder over the attaching part so the tilt swivel fits. Screw the holder onto the attaching part.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for AT&T 8125:

Part No: Brodit 848681
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: AT&T 8125 for USA
Placement:
Price: £ 40.23
Description:
For an upright, closed position.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in an upright closed position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 968681
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Cingular 8125 for USA
Placement:
Price: £ 34.97
Description:
With tilt swivel. For an upright, closed position.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 942625
Product Type: Brodit Charging Cable
Product Fits: AT&T 8125 for USA
Placement:
Price: £ 15.54
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 968681
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: AT&T 8125 for USA
Placement:
Price: £ 34.97
Description:
With tilt swivel. For an upright, closed position.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 971681
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Cingular 8125 for USA
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger. For an upright, closed position.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 968694
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: AT&T 8125 for USA
Placement:
Price: £ 34.97
Description:
With tilt swivel. For a horizontal, open position.
Technical Information:
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 971681
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: AT&T 8125 for USA
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger. For an upright, closed position.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848681
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Cingular 8125 for USA
Placement:
Price: £ 40.23
Description:
For an upright, closed position.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in an upright closed position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 942625
Product Type: Brodit Charging Cable
Product Fits: Cingular 8125 for USA
Placement:
Price: £ 15.54
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 848694
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Cingular 8125 for USA
Placement:
Price: £ 21.89
Description:
For a horizontal, open position.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in a horizontal open position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Passive Holder for PDA.

The passive holder is the choice for you who want to have your PDA safely installed in the vehicle. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.