Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Apple IPad
Brodit Monitor Mount (Brodit 215444)

Monitor Mount for Apple IPad
Reference ID: 25296.
Product Type: Brodit Monitor Mount.
Part Number: Brodit 215444.
Fitment: Apple IPad For All Countries.

Price:

£ 23.7
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of white ABS plastic.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Monitor Mount also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Monitor Mount for Apple IPad:

Please read all of the instructions and look at the pictures before attaching the monitor mount.

1. Place the mount into desired position and screw it into place.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

3. The holder is in place in upright position.

4. The holder is in place in horizontal position.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Apple IPad:

Part No: Brodit 511139
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPad for all countries
Placement:
Price: £ 33.7
Technical Information:
With your iPad in a holder attached in your vehicle you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 215445
Product Type: Brodit Monitor Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 23.7
Description:
Wall mount. Black.
Technical Information:
Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.
More Info
Part No: Brodit 215447
Product Type: Brodit Headrest Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 82.4
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.
More Info
Part No: Brodit 215461
Product Type: Brodit Device Mounting Adapter
Product Fits: Apple iPad for all countries
Placement:
Price: £ 7.54
Description:
Mounting adapter for item no. 215473. Screws included. 50x60x8 mm.
Technical Information:
Mounting adapter for iPad MultiStand (item no 215473). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of black ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, mobile version
More Info
Part No: Brodit 514139
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPad for all countries
Placement:
Price: £ 45.41
Description:
For Apple original Cable (Short). With tilt swivel.
Technical Information:
The choice for you who often connect an Apple original cable (with thin plug) to your iPad. The connector is easy to attach to the holder. It then connects automatically to the iPad when you put it in the holder, so you do not have to connect the cable it manually each time.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 521139
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel. With USB cable. Apple approved charging cable.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder?s cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 810570
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 77.01
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 211 mm
More Info
Part No: Brodit 215473
Product Type: Brodit MultiStand
Product Fits: Apple iPad for all countries
Placement:
Price: £ 48.68
Description:
Mounting Adapter and Screws Included. Black.
Technical Information:
A versatile multi stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the multi stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap.

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility.
More Info
Part No: Brodit 215446
Product Type: Brodit Headrest Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 117.23
Technical Information:
Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.
More Info
Part No: Brodit 527139
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPad for all countries
Placement:
Price: £ 99.37
Description:
With tilt swivel. 2A charger.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Catalog Pages:  [ 1 ] 2  3 
Additional Information

Additional Information:
Headrest Monitor Mount with Flexile Arm.

Are you planning to install Tablet DVD or perhaps a video, DVD-unit or Playstation 2 in your car?
With Brodit monitor mount, you can position your screen for easier viewing and to avoid light reflection.

The headrest monitor mount with flexible arm for monitors gives optimum viewing and easy screen adjustment. With the extended flexible arm you can adjust the screen just the way you want.

Installation is simple and will not damage your vehicle's interior. You can easily take the monitor with you when leaving the vehicle.

It is easy to install a mutlimedia monitor in the vehicle. First you attach a monitor mount onto the headrest of a front seat. The mount is available for various monitor models. Then you attach the monitor to the mount. The monitor is firmly in place, and can easily be removed when leaving the vehicle.