Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Apple IPhone 3G
 Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 511041)

Passive Holder With Tilt Swivel for Apple IPhone 3G
Reference ID: 20559.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 511041.
Fitment: Apple IPhone 3G For All Countries.

Price:
£ 24.89
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the holder, it will then be easy accessable whenever you want to use it. (Cable not included)

The passive holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for Apple IPhone 3G:

Please read all of the instructions and look at the pictures before attaching the holder. The holder in the installation pictures may look slightly different from the one you have received. However, the same instructions apply.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. You can easily switch between an upright and a horizontal position, simply by turning the holder into desired position.
2. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder. To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder.
3. If you are using a cable to your device: Press the cable into place in the cable holder in the bottom part of the holder. The cable will then be held in place giving a neat installation.
4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Apple IPhone 3G:

Part No: Brodit 915255
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 39.58
Description:
For Griffin PowerJolt cable. Padded.
Technical Information:
Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Not for PowerJolt SE. The holder Fits only the old Griffin PowerJolt cable with release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 875214
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 24.89
Description:
Adjustable holder, fits devices with skins.
Technical Information:
With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 516042
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 76.65
Description:
For a more secure upright and horizontal position. Adjustable holder, fits devices with skins.
Technical Information:
This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included)

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 915246
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 74.74
Description:
Padded.
Technical Information:
Holder with pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. (Cable not included)

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 533091
Product Type: Brodit Mounting Accessories
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 16.72
Description:
Tilt swivel mount. For TomTom Car Kit.
Technical Information:
The choice for you who want to have your TomTom Car Kit device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 875246
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 24.89
Description:
Padded.
Technical Information:
When keeping your mobile in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the mobile when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 516041
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 76.65
Description:
For a more secure upright and horizontal position. Padded.
Technical Information:
This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included) This holder provides a more secure upright and horizontal position than a standard holder with pass-through connector.

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 915297
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 39.58
Description:
For use with Parrot MK9000-series. With tilt swivel. Padded.
Technical Information:
The choice for you who use a Parrot MK9000-series with your iPhone 3G. You easily attach the Parrot-cable to the holder. Your iPhone will then be automatically connected to the Parrot-cable each time you put the device in the holder, you do not need to attach it manually.

The holder is padded and equipped with a tilt swivel so you can adjust the angle of your iPhone. (Cable not included.) Attach onto ProClip Mounting Platform. Neat, convenient and safe!
More Info
Part No: Brodit 915290
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 74.74
Description:
Adjustable holder, fits devices with skins.
Technical Information:
Holder with pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. (Cable not included)

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 907255
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPhone 3G for all countries
Placement:
Price: £ 64.09
Description:
With tilt swivel. With USB cable. Apple approved charging cable. Padded.
Technical Information:
Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder’s cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable. The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Passive Holder for PDA.

The passive holder is the choice for you who want to have your PDA safely installed in the vehicle. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.