Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Apple IPod Touch 2nd Generation
Brodit Car Cradle Holder For Cable Attachment (Brodit 846861)

Holder For Cable Attachment for Apple IPod Touch 2nd Generation
Reference ID: 19177.
Product Type: Brodit Car Cradle Holder For Cable Attachment.
Part Number: Brodit 846861.
Fitment: Apple IPod Touch 2nd Generation For All Countries.

Price:

£ 53.02
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included).

Not for PowerJolt SE. The holder Fits only the old Griffin PowerJolt cable with release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Car Cradle Holder For Cable Attachment also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder For Cable Attachment for Apple IPod Touch 2nd Generation:

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the holder with the backside upwards. Place the connector into the lower part of the holder. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in place.

2. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back.

3. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder in place, with cable in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Apple IPod Touch 2nd Generation:

Part No: Brodit 848861
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 24.89
Description:
Padded.
Technical Information:
With your iPod in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPod in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 847861
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 74.74
Description:
Padded.
Technical Information:
Holder with pass-through connector. All cables that can be used with the iPod can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPod in the holder. (Cable not included)

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 907861
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 64.09
Description:
With tilt swivel. With USB cable. Padded.
Technical Information:
Use an active holder for your MP3-player while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder’s cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable. The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 533091
Product Type: Brodit Mounting Accessories
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 16.72
Description:
Tilt swivel mount. For TomTom Car Kit.
Technical Information:
The choice for you who want to have your TomTom Car Kit device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 521410
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 86.46
Description:
With tilt swivel. With USB cable. Apple approved charging cable. Fits devices with or without skin.
Technical Information:
Use an active holder for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the device in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of black plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for devices with or without skin.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info
Part No: Brodit 527115
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. 2A charger.
Technical Information:
The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.
 
Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12 Volt. Apple approved cable. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info
Part No: Brodit 514115
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 39.58
Description:
For Griffin PowerJolt cable. Padded.
Technical Information:
Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 527410
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 101.15
Description:
With tilt swivel. Fits devices with or without skin. Apple approved charging cable.
Technical Information:
Use an active holder for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.
 
When you place the device in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
 
The holder is made of black Acetal plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for devices with or without skin.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info
Additional Information

Additional Information:
PDA Holder for Cable Attachment.

The choice for you who often connect e.g. a GPS or charging/data-cable to your PDA.

Fits all cables that fit with the PDA, both original and aftermarket cables (Leadtek, Royaltek, Holux, Haicom etc). You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the PDA in the holder.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display. The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your
vehicle and you'll have your PDA in easy reach - safe and convenient.

Fits ALL cables!