Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Car Holder Mount Catalog

Part No: Brodit 945078
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 9.2
Description:
Molex Pin 4 adaptor to RX/TX/Ground, with open ends.
Technical Information:
Length of cable: 100cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 215341
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 13.56
Description:
Self tapping screws. 50 pcs.
Technical Information:
Self tapping screws for ABS plastic, used when making own special mounting solutions.
More Info Add to Shopping Cart
Part No: Brodit 215284
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 4.02
Description:
Headset Hook. For PDA handheld holders.
Technical Information:
A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.

For use with PDA handheld holders. Fits holders both with and without tilt swivel. 2 screws included in the package.
More Info Add to Shopping Cart
Part No: Brodit 215118
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 10.38
Description:
Extension plate, 143x50x5mm. With predrilled AMPS holes.
Technical Information:
The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. Predrilled holes, AMPS standard. Made of black ABS plastic. Size: 143x50x5mm.
More Info Add to Shopping Cart
Part No: Brodit 215181
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 34.3
Description:
Flexible arm, 15 cm. With predrilled AMPS-standard holes.
Technical Information:
A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position.
More Info Add to Shopping Cart
Part No: Brodit 215205
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 13.56
Description:
Vertical adapter plate for Arkon.
Technical Information:
A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Base plate: 42x50 mm.
More Info Add to Shopping Cart
Part No: Brodit 215497
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 10.38
Description:
Universal mount for slot button and clip holder. With predrilled holes.
Technical Information:
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.
More Info Add to Shopping Cart
Part No: Brodit 215052
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 7.3
Description:
V-slot button and clip holder. With predrilled holes.
Technical Information:
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip. 50x50x9 mm.
More Info Add to Shopping Cart
Part No: Brodit 215055
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
MoveClip "Right" with 4 holes in both male & female.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 213077
Product Type: Brodit Mount
Product Fits:
Placement:
Price: £ 15.44
Description:
Angled mounting platform, 30°. Attach with adhesive tape to flat, horizontal surface.
Technical Information:
Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
More Info Add to Shopping Cart
Part No: Brodit 511230
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price: £ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 6-10 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215054
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
MoveClip "Left" with 4 holes in both male & female.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 945008
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 10.38
Description:
Female cigg-plug with open ends for fixed installation.
Technical Information:
Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter plug for a fixed installation. Is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

Connect the power cable with a 1,5 A fuse. Professional installation recommended. Can also be used as an additional socket.
More Info Add to Shopping Cart
Part No: Brodit 215159
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.
Technical Information:
Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.
More Info Add to Shopping Cart
Part No: Brodit 213078
Product Type: Brodit Mount
Product Fits:
Placement:
Price: £ 15.44
Description:
Angled mounting platform, 45°. Attach with adhesive tape to flat, horizontal surface.
Technical Information:
Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
More Info Add to Shopping Cart
Catalog Pages: < Prev   1  2  3 [ 4 ] 5  6  7  8  9  10 ...23 Next >