Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Car Holder Mount Catalog

Part No: Brodit 945012
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 9.2
Description:
Molex Pin 2 adaptor to cig-plug.
Technical Information:
Is to be attached to the Molex adapter system in order to replace the cable for fixed installation with a cigarette lighter cable.

Length of cable: 42,5cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 215452
Product Type: Brodit Tilt Swivel
Product Fits:
Placement:
Price: £ 13.56
Description:
Oval centered face plate with predrilled AMPS holes. Adjustable 20°.
Technical Information:
A small, oval face plate with predrilled holes for Brodit holders and THB HF-kits. Can be angled 20° in every direction.
More Info Add to Shopping Cart
Part No: Brodit 215450
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 10.38
Description:
Distance plate, 42x50x14 mm. With predrilled AMPS holes.
Technical Information:
Used for positioning the installed equipment further away from the dashboard. Dimensions: 42x50x14 mm.
More Info Add to Shopping Cart
Part No: Brodit 945074
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 10.38
Description:
Molex Pin 4 adaptor to Mini USB.
Technical Information:
Length of cable: 176,5cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 215061
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 7.54
Description:
Device mounting Female adapter, AMPS-standard holes. To 215053.
Technical Information:
The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the Device or Cradle.

The Device Mounting Adapter consists of two parts - one Male Plate and One Female Plate that slides into each other and locks into place. The Male Plate attaches to the back of the Device/Device Cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The Female Plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the Device or Device Cradle can easily be removed from the mount. Your Device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the Male Plate. The pictures show the Device Mounting Adapter in use with a Sirius Satellite Receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 511231
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price: £ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 9-13 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215527
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 10.38
Description:
MultiMoveClip: adapter plate for holder without tilt swivel. With AMPS holes.
Technical Information:
A mounting adapter for you who has a holder without tilt swivel that you wish to use with your MultiMoveClip (item number 215503). Fits holders with AMPS holes.
More Info Add to Shopping Cart
Part No: Brodit 521630
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 521844
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. With Micro USB Type C charging cable.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 521840
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. With Micro USB Type C charging cable.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 215342
Product Type: Brodit Pipe Mount With Tilt Swivel
Product Fits:
Placement:
Price: £ 42.36
Description:
Motorcycle mount with tilt swivel plate, predrilled AMPS holes. 31,8 mm diameter.
Technical Information:
Motorcycle mount, is to be installed on the handle bar. To be used for installation of a PNA, GPS device, PDA etc.

The mount is equiped with a tilt swivel, so you can adjust the device in order to avoid light reflection. The face plate has predrilled holes (AMPS-standard).
More Info Add to Shopping Cart
Part No: Brodit 215559
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 17.66
Description:
MultiMoveClip, 4 screws. High strength. With release button.
More Info Add to Shopping Cart
Part No: Brodit 215231
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 19.9
Description:
Horizontal adapter plate with tilt swivel, for Arkon. Singel T.
Technical Information:
A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The mount is equipped with a tilt swivel. Attach onto ProClip Mounting Platform. Base plate: 50x42 mm.
More Info Add to Shopping Cart
Part No: Brodit 215200
Product Type: Brodit Tilt Swivel
Product Fits:
Placement:
Price: £ 23.08
Description:
Sturdy tilt swivel with centered face plate with predrilled holes. 50x70x21 mm.
Technical Information:
Mounting plate with a big strong tilt swivel for installation of heavier devices such as larger monitors, laptops etc. Allows you to adjust the angle of the device and provides a flexible yet firm installation. Dimensions: 50x70x21 mm.
More Info Add to Shopping Cart
Part No: Brodit 213050
Product Type: Brodit Monitor Mount
Product Fits:
Placement:
Price: £ 22.04
Description:
Mounting plate with Tilt Swivel, centered. Low
Technical Information:
Smaller, lower face plate. The choice for an adjustable monitor angle. Fits monitors with a vertical slot in back.Install onto ProClip.
More Info Add to Shopping Cart
Catalog Pages: < Prev   1  2  3  4 [ 5 ] 6  7  8  9  10 ...23 Next >