Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Car Holder Mount Catalog

Part No: Brodit 215198
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 13.56
Description:
Horizontal adapter Plate, for Arkon.
Technical Information:
A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Attach onto ProClip Mounting Platform. Base plate: 42x50 mm.
More Info Add to Shopping Cart
Part No: Brodit 213020
Product Type: Brodit Tilt Swivel
Product Fits:
Placement:
Price: £ 27.36
Description:
Dual. With two off center face plates with predrilled AMPS holes. Adjustable 15°.
Technical Information:
The choice when you want to install two units e.g. a holder for a PDA and a HF-kit. With predrilled holes for Nokia and Sony Ericsson Original HF-kits, brodit holders and THB HF-kits. Can be angled 15° in every direction. n. Base plate: 100x50 mm. Width over face plates: 119 mm. Thickness 25 mm.
More Info Add to Shopping Cart
Part No: Brodit 521620
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 521622
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 213409
Product Type: Brodit Mounting Equipment
Product Fits:
Placement:
Price: £ 27.83
Description:
Holder to Taxameter, Compact RX80. top mounted.
More Info Add to Shopping Cart
Part No: Brodit 215370
Product Type: Brodit Pipe Mount With Tilt Swivel
Product Fits:
Placement:
Price: £ 45.04
Description:
Fits diameter 19-30 mm. Face plate angled 90°.
Technical Information:
For installation of devices on pipes and stays, for example all kind of vehicles, on motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a 90° angle face plate which is attached onto a tilt swivel. This means you can adjust your device in order to get it in a better position/angle. The mount fits pipes with diameter 19-30 mm. Made in black plastic.
More Info Add to Shopping Cart
No Image
Part No: Brodit 841401
Product Type: Brodit Passive Car Cradle Holder
Product Fits:
Placement:
Price: £ 16.48
Description:
Holder for two way radio. Right, short.
Technical Information:
Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 521629
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 213023
Product Type: Brodit Mounting Equipment
Product Fits:
Placement:
Price: £ 22.04
Description:
Turn around plate AMPS-standard. (For Ericsson 380)
Technical Information:
Allows you to switch your equipment between an upright/horizontal position. Perfect for a HF-kit for Ericsson 380 etc. With predrilled holes for Nokia/Sony Ericsson original HF-kits.
More Info Add to Shopping Cart
Part No: Brodit 945075
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 10.38
Description:
Molex Pin 4 adaptor to PS2.
Technical Information:
Length of cable: 25cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 945030
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 7.94
Description:
Power adapter PS2-DC iPAQ standard. 1,5 m.
Technical Information:
Adapter from PS2 to DC iPAQ standard connector. For use with Brodit PDA holders with item number 970xxx for e.g. power supply for a Bluetooth GPS.
More Info Add to Shopping Cart
No Image
Part No: Brodit 862095
Product Type: Brodit Mounting Equipment
Product Fits:
Placement:
Price: £ 19.99
Description:
ISO 533 Mazda Demio, 323, 626 2001-
More Info Add to Shopping Cart
No Image
Part No: Brodit 862057
Product Type: Brodit Mounting Equipment
Product Fits:
Placement:
Price: £ 19.99
Description:
ISO 501, Nissan - All models
More Info Add to Shopping Cart
No Image
Part No: Brodit 841405
Product Type: Brodit Passive Car Cradle Holder
Product Fits:
Placement:
Price: £ 16.48
Description:
Holder for two way radio. Left, short.
Technical Information:
Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
No Image
Part No: Brodit PV12I
Product Type: Brodit Voltage Converter
Product Fits:
Placement:
Price: £ 29.99
Description:
AlfaTronix Isolated 24-12V switched - (12-18 amp)
More Info Add to Shopping Cart
Catalog Pages: < Prev 1... 2  3  4  5  6 [ 7 ] 8  9  10  11  12 ...23 Next >