Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Getac Brodit Car Holder Mount Catalog

Part No: Brodit 511950
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 78.84
Technical Information:
With a holder attached in your vehicle you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.   
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the vehicle.
More Info Add to Shopping Cart
Part No: Brodit 532481
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 140.39
Description:
With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 530481
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 140.39
Description:
With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 530480
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 101.11
Description:
Fits unit both with and without handstrap.
Technical Information:
With your Getac in a holder attached in your vehicle you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the vehicle.
More Info Add to Shopping Cart
Part No: Brodit 532481
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 140.39
Description:
With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 535480
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 (EU Version) for all countries
Placement:
Price: £ 142.17
Description:
Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac from the holder you need the key, two keys are included. Fits units both with and without handstrap.
More Info Add to Shopping Cart
Part No: Brodit 510813
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Getac F110 for all countries
Placement:
Price: £ 75.93
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 530480
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 101.11
Description:
Fits unit both with and without handstrap.
Technical Information:
With your Getac in a holder attached in your vehicle you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the vehicle.
More Info Add to Shopping Cart
Part No: Brodit 535480
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 142.17
Description:
Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac from the holder you need the key, two keys are included. Fits units both with and without handstrap.
More Info Add to Shopping Cart
Part No: Brodit 535481
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 183.18
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 2 keys included. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 536481
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 for all countries
Placement:
Price: £ 183.18
Description:
Active holder for fixed installation. With tilt swivel. Slim design with charger integrated in the holder. 2 keys included. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 535480
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 142.17
Description:
Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac from the holder you need the key, two keys are included. Fits units both with and without handstrap.
More Info Add to Shopping Cart
Part No: Brodit 530481
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 140.39
Description:
With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 536481
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 183.18
Description:
Active holder for fixed installation. With tilt swivel. Slim design with charger integrated in the holder. 2 keys included. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 535481
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Getac Z710 (US Version) for all countries
Placement:
Price: £ 183.18
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 2 keys included. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
Technical Information:
This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2