Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Zebra Brodit Car Holder Mount Catalog

Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 539902
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 225.38
Description:
With lock, 2 keys. Fits devices with rugged frame. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame ( NOT for expansion module/handstrap). The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.         
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 550810
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 256.45
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.      
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 550888
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 322.3
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With USB and DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder has a USB connector for data connection.    
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 539902
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 225.38
Description:
With lock, 2 keys. Fits devices with rugged frame. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame ( NOT for expansion module/handstrap). The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.         
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 550810
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 256.45
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.      
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 215781
Product Type: Brodit MultiStand
Product Fits: Zebra ET50 8.3 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for smaller surfpads. Length: 98 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 98 mm long and fits best with smaller surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 550888
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 322.3
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With USB and DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder has a USB connector for data connection.    
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 941021
Product Type: Brodit Charging Cable
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 115.78
Description:
Hard wire for fixed installation, with DC power plug.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 74 cm from DC power connector to box, 10 cm box, 297 cm from box to open ends.
Weight: 147 g
 
Input voltage: 12 V, 2.7 A
Input Voltage: 24 V, 1.3 A
Output voltage: 12.6 V, 2,5 A
More Info Add to Shopping Cart
Part No: Brodit 539892
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 305.62
Description:
With lock, 2 keys. Fits devices with rugged frame. With USB and DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame ( NOT for expansion module/handstrap). The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder has a USB connector for data connection.     
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 539960
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 334.75
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With USB and DC power connector (power supply NOT included). For 30 pin.
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 941017    Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder includes a USB connector for Power & Data connectivity (Maximum current: 900mA @ 5Vdc)  

Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 941021
Product Type: Brodit Charging Cable
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 115.78
Description:
Hard wire for fixed installation, with DC power plug.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 74 cm from DC power connector to box, 10 cm box, 297 cm from box to open ends.
Weight: 147 g
 
Input voltage: 12 V, 2.7 A
Input Voltage: 24 V, 1.3 A
Output voltage: 12.6 V, 2,5 A
More Info Add to Shopping Cart
Part No: Brodit 511914
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 143.69
Description:
Extra strength holder. Fits devices with rugged frame, with and without expansion module/handstrap.
Technical Information:
This holder is the perfect choice when you want to have your device firmly in place within easy reach. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder is made of extra strong plastic. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
 
Dimensions: 325 x 216 x 90 mm (W x H x D mm)
Weight: 932 g
More Info Add to Shopping Cart
Part No: Brodit 511893
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Zebra ET50 8.3 for all countries
Placement:
Price: £ 139.25
Description:
Extra strength holder. Fits devices with rugged frame, with and without expansion module/handstrap.
Technical Information:
This holder is the perfect choice when you want to have your device firmly in place within easy reach. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder is made of extra strong plastic. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
 
Dimensions: 275 x 190 x 90 mm (W x H x D mm)
Weight: 740 g
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2