Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Dell Brodit Car Holder Mount Catalog

Part No: Brodit 511365
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Latitude ST 10,1" for all countries
Placement:
Price: £ 33.7
Technical Information:
With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 968627
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Dell Axim X50 for all countries
Placement:
Price: £ 55.99
Description:
Plugs directly into your Cigarette lighter. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 968627
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Dell Axim X51 for all countries
Placement:
Price: £ 55.99
Description:
Plugs directly into your Cigarette lighter. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt, 2 Amps. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 539614
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Dell Venue 11 Pro, New (Model 7140) for all countries
Placement:
Price: £ 65.94
Description:
Passive holder with tilt swivel. 2 keys included.
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511365
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Latitude for all countries
Placement:
Price: £ 33.7
Technical Information:
With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 848627
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Axim X51 for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info Add to Shopping Cart
Part No: Brodit 848634
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Pocket DJ for USA
Placement:
Price: £ 21.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 848555
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Axim X5 for all countries
Placement:
Price: £ 24.89
Description:
For standard battery.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 848592
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Axim X3i for USA
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 511614
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Venue 11 Pro, New (Model 7140) for all countries
Placement:
Price: £ 33.7
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511672
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 33.7
Description:
For device with Targus SafePORT Rugged Max Pro protective case.
Technical Information:
With your tablet in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 942627
Product Type: Brodit Charging Cable
Product Fits: Dell Axim X50 for all countries
Placement:
Price: £ 27.98
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info Add to Shopping Cart
Part No: Brodit 848634
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell DJ5 for all countries
Placement:
Price: £ 21.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 944011
Product Type: Brodit Charging Cable
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 15.54
Description:
Micro USB. 12/24V. Angled.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.
More Info Add to Shopping Cart
Part No: Brodit 513672
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel, with Molex adapter system. 2A charger. With fly lead. For device with Targus SafePORT Rugged Max Pro protective case.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2  3  4