Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Dell Latitude ST 10,1"
Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 511365)

Passive Holder With Tilt Swivel for Dell Latitude ST 10,1"
Reference ID: 42082.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 511365.
Fitment: Dell Latitude ST 10,1" For All Countries.

Price:

£ 33.7
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for Dell Latitude ST 10,1":

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Dell Latitude ST 10,1":

Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Dell Latitude ST 10,1" for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Additional Information

Additional Information:
Passive Holder for MP3-Players.

The choice for you who want to have your MP3-player safely installed and always within easy reach!

The passive holder can be used with cigarette lighter charging cables and headsets.

The holder is attached onto a tilt swivel so it can be adjusted in order to avoid light reflection.

Attach onto the ProClip Mounting Platform.