Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

HP IPAQ H22xx
Brodit Active Car Cradle Holder For Fixed Installation (Brodit 971578)

Active Holder For Fixed Installation for HP IPAQ H22xx
Reference ID: 12818.
Product Type: Brodit Active Car Cradle Holder For Fixed Installation.
Part Number: Brodit 971578.
Fitment: HP IPAQ H22xx For All Countries.

Price:

£ 72.13
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

How to Install Active Car Cradle Holder For Fixed Installation for HP IPAQ H22xx:

Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the holder please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters.

Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.

Installation of the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. 4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for HP IPAQ H22xx:

Part No: Brodit 968579
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848574
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 86.43
Description:
With built in original connector. Fits all cables.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 979578
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 38.5
Description:
12-24 Volt. Straight cable for fixed installation and cable with TX, RX, Ground.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848579
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 33.7
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 942034
Product Type: Brodit Charging Cable
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 15.54
Description:
12 V.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 848568
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 944034
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 24.56
Description:
Sync-cable with RS232/USB-connector.
Technical Information:
For use between PDA and laptop, sonchronizes data. (Not for charging)
More Info
Part No: Brodit 945004
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 23.78
Description:
HotSync cable with RS232 with separate charging.
Technical Information:
For use between PDA and laptop, charges separately. Can also be used with charging-cable 942016 for simultaneous charging and data transfer.
More Info
Part No: Brodit 945002
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 27.98
Description:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). 2 meter.
Technical Information:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). Is used for special applications. 2 meter.
More Info
Part No: Brodit 999574
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ h22xx for all countries
Placement:
Price: £ 125.98
Description:
With built in connector. With tilt swivel.
Technical Information:
Holder for cable attachment, with speaker. The choice for you who often connect e.g. a GPS- or charging/data-cable to your PDA. Fits all cables that fit with the device, both original and aftermarket cables (Leadtek, Royaltek, Holux, Haicom etc).

You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the device in the holder. (A charging cable must be connected in order for the amplifier to function.)

The holder is attached onto a tilt swivel so you can adjust the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Active Holder with Cigarette Lighter Plug.

The choice for you who frequently use your PDA. Charges your PDA battery while it's in the holder. The PDA connects to the charging device every time you put the PDA in the holder. 12/24 Volt.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.