Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

HP IPAQ Hx47xx
Brodit Charging Cable (Brodit 942034)

Charging Cable for HP IPAQ Hx47xx
Reference ID: 12172.
Product Type: Brodit Charging Cable.
Part Number: Brodit 942034.
Fitment: HP IPAQ Hx47xx For All Countries.

Price:

£ 15.54
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.

This Product is also Compatible with the Following 14 Devices :

The drop-down list below provides a list of other devices which this Charging Cable also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

Other Products for HP IPAQ Hx47xx:

Part No: Brodit 847621
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 33.7
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 968621
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 979621
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 38.5
Description:
With straight cable for fixed installation and cable with TX, RX, Ground. 12-24 Volt.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 846621
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 33.7
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848621
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 971621
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system for GPS and data transfer. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 849621
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 65.92
Description:
With built in connector. Fits all cables.
Technical Information:
Holder with cable plug attachment, with an iPAQ original connector built in with the holder. Is to be used with charging-, data-, sync- or GPS-cable. Fits all cables that fit with the PDA, both original and aftermarket cables. You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Quick and easy installation onto a ProClip Mounting Platform.
More Info
Part No: Brodit 999621
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 125.98
Description:
With built in connector. With tilt swivel.
Technical Information:
Holder for cable attachment, with speaker. The choice for you who often connect e.g. a GPS- or charging/data-cable to your PDA. Fits all cables that fit with the device, both original and aftermarket cables (Leadtek, Royaltek, Holux, Haicom etc).

You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the device in the holder. (A charging cable must be connected in order for the amplifier to function.)

The holder is attached onto a tilt swivel so you can adjust the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 992621
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 99.37
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 994621
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ hx47xx for all countries
Placement:
Price: £ 114.05
Description:
Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Technical Information:
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.

12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Additional Information

Additional Information:
Keep Your PDA in a Customized Holder!

A PDA holder makes it easier and more fun to use your PDA in your vehicle.
Keep your PDA in a holder and you will always have it in easy reach - safe and convenient!

With Tilt Swivel.
All PDA holders are designed with a tilt swivel. The tilt swivel provides easy adjustment of your PDAs' position for better viewing.

High Quality.
The holders have a perfect fit and provides a firm installation. It is easy to place the PDA in the holder, and to take it out of the holder.

A Wide Range of Products.
The holders are customized for every different PDA model, and are available for most models on the market. A customized holder is usually ready when a new model appears on the market.

Many Alternatives.
PDA holders are available with various features, from passive holders to more advanced solutions for fixed installation.

Attach onto ProClip.
Attach the holder onto the ProClip Mounting Platform in your vehicle. The installation is quick and easy, and does not damage the interior.

Safer Driving.
With your PDA in a holder, it is always within easy reach. Our goal is to provide you with convenient products and solutions, to give you a safer driving environment while driving and operating your equipment.