Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

HP IPAQ Rx19xx
 Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 848591)

Passive Holder With Tilt Swivel for HP IPAQ Rx19xx
Reference ID: 8250.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 848591.
Fitment: HP IPAQ Rx19xx For All Countries.

Price:
£ 24.89
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for HP IPAQ Rx19xx:

Attention! Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.

3. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for HP IPAQ Rx19xx:

Part No: Brodit 943034
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 23.78
Description:
Charging- and Sync-cable with USB connector.
Technical Information:
For use between PDA and laptop, charges and synchronizes simultaneously. Can also be used as a charging-cable in combination with 942001 for connection to the vechile’s cigarette lighter socket.
More Info
Part No: Brodit 971591
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system for GPS and data transfer. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 945003
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 17.44
Description:
HotSync cable with USB with separate charging.
Technical Information:
For use between PDA and laptop, charges separately. Can also be used with charging-cable 942016 for simultaneous charging and data transfer.
More Info
Part No: Brodit 942034
Product Type: Brodit Charging Cable
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 15.54
Description:
12 V.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 994591
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 146.29
Description:
For fixed installation. With 2 Amps/Molex charger and built in speaker. With tiltswivel. without exp. pack.
Technical Information:
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.

12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 979591
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 34.99
Description:
12-24 Volt. Straight cable for fixed installation and cable with TX, RX, Ground.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 999591
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 125.98
Description:
With built in connector. With tilt swivel.
Technical Information:
Holder for cable attachment, with speaker. The choice for you who often connect e.g. a GPS- or charging/data-cable to your PDA. Fits all cables that fit with the device, both original and aftermarket cables (Leadtek, Royaltek, Holux, Haicom etc).

You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the device in the holder. (A charging cable must be connected in order for the amplifier to function.)

The holder is attached onto a tilt swivel so you can adjust the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 992591
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 138.58
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 945004
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 23.78
Description:
HotSync cable with RS232 with separate charging.
Technical Information:
For use between PDA and laptop, charges separately. Can also be used with charging-cable 942016 for simultaneous charging and data transfer.
More Info
Part No: Brodit 945002
Product Type: Brodit Charging/Data/Sync-Cable
Product Fits: HP iPAQ rx19xx for all countries
Placement:
Price: £ 27.98
Description:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). 2 meter.
Technical Information:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). Is used for special applications. 2 meter.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Passive Holder for PDA.

The passive holder is the choice for you who want to have your PDA safely installed in the vehicle. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.