Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

HTC One
Brodit Active Car Cradle Holder With Cig-Plug (Brodit 521524)

Active Holder With Cig-Plug for HTC One
Reference ID: 46266.
Product Type: Brodit Active Car Cradle Holder With Cig-Plug.
Part Number: Brodit 521524.
Fitment: HTC One For All Countries.

Price:

£ 64.09
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The active holder charges your HTC One when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).

How to Install Active Car Cradle Holder With Cig-Plug for HTC One:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for HTC One:

Part No: Brodit 215103
Product Type: Brodit Mount With Tilt Swivel
Product Fits: TomTom One for all countries
Placement:
Price: £ 21.97
Technical Information:
More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 512116
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Nexus One for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 653979
Product Type: Brodit ProClip Mount
Product Fits: Mini One 2007-2011 RHD for all countries
Placement: Angled mount, NOT for models with upper glove comp
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 511648
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: OnePlus One for all countries
Placement:
Price: £ 24.89
Technical Information:
When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 511524
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: HTC One for all countries
Placement:
Price: £ 24.89
Technical Information:
When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 654046
Product Type: Brodit ProClip Mount
Product Fits: Mini One 2007-2009 RHD for all countries
Placement: Angled mount, ONLY for models with upper glove com
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 513116
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Nexus One for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 510126
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Nexus One for all countries
Placement:
Price: £ 27.9
Description:
Padded.
Technical Information:
When keeping your mobile in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the mobile when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 215119
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: TomTom One for Europa
Placement:
Price: £ 50.48
Description:
With straight cable for fixed installation. 12/24 Volt, 2 A charger.
Technical Information:
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Size: 143x50x5mm.
More Info
Part No: Brodit 511126
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Nexus One for all countries
Placement:
Price: £ 24.89
Description:
Padded.
Technical Information:
When keeping your unit in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the unit when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2  3  4  5  6 
Additional Information

Additional Information:
Keep Your PDA in a Customized Holder!

A PDA holder makes it easier and more fun to use your PDA in your vehicle.
Keep your PDA in a holder and you will always have it in easy reach - safe and convenient!

With Tilt Swivel.
All PDA holders are designed with a tilt swivel. The tilt swivel provides easy adjustment of your PDAs' position for better viewing.

High Quality.
The holders have a perfect fit and provides a firm installation. It is easy to place the PDA in the holder, and to take it out of the holder.

A Wide Range of Products.
The holders are customized for every different PDA model, and are available for most models on the market. A customized holder is usually ready when a new model appears on the market.

Many Alternatives.
PDA holders are available with various features, from passive holders to more advanced solutions for fixed installation.

Attach onto ProClip.
Attach the holder onto the ProClip Mounting Platform in your vehicle. The installation is quick and easy, and does not damage the interior.

Safer Driving.
With your PDA in a holder, it is always within easy reach. Our goal is to provide you with convenient products and solutions, to give you a safer driving environment while driving and operating your equipment.