Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Hema Navigator
Brodit Device Mounting Adapter (Brodit 215114)

Device Mounting Adapter for Hema Navigator
Reference ID: 20433.
Product Type: Brodit Device Mounting Adapter.
Part Number: Brodit 215114.
Fitment: Hema Navigator For All Countries.

Price:

£ 15.14
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

This Product is also Compatible with the Following 81 Devices :

The drop-down list below provides a list of other devices which this Device Mounting Adapter also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Device Mounting Adapter for Hema Navigator:

Attention! Read all instructions before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.

3. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Hema Navigator:

Part No: Brodit 852693
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 1999-2002 LHD for all countries
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854040
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 2007-2008 LHD for USA
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854041
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 2007-2008 LHD for USA
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810810
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Lincoln Navigator 2007-2011 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia monitors in vehicles. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat’s headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It’s easy to take the monitor with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The headrest monitor mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the headrest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 854041
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 2007-2011 LHD for USA
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810510
Product Type: Brodit Headrest Mount
Product Fits: Lincoln Navigator 2007-2010 LHD for USA
Placement: Headrest mount
Price: £ 77.01
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 155 mm
More Info
Part No: Brodit 811010
Product Type: Brodit Headrest Mount
Product Fits: Lincoln Navigator 2007-2015 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
Technical Information:
Note: Two-part solution!
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 810810
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Lincoln Navigator 2007-2012 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia monitors in vehicles. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat’s headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It’s easy to take the monitor with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The headrest monitor mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the headrest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 853112
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 2003-2006 LHD for USA
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 832370
Product Type: Brodit ProClip Mount
Product Fits: Lincoln Navigator 1997-1998 LHD for USA
Placement: Console mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Catalog Pages:  [ 1 ] 2  3  4  5  6 
Additional Information

Additional Information:
Brodit - with More Than 20 Years in the Business!

Brodit was conceived back in June 1983 as its founder Ebbe Johansson was sitting in his Taxi and had the vision of talking on the phone while driving without having to pull over. Some of you still remember the mobile phones from back then. They were not as neat and handy as they are today. They were more like suitcases weighing about 40 pounds with receivers as big as a brick! Ebbe saw the need for an easy way to have the receiver installed close to the driver's seat in order to use it comfortably. As a result, the ProClip was born, which is still the market leader for mounting platforms for communication equipment in vehicles today.

Since then, many thousand different models and solutions have been developed for just about every vehicle in the world. Easy installation is one of the objectives, and another is not having to drill holes or in any other way damage the interior of the car! Brodit also produces holders for PDAs, mobile phones, GPS devices and multimedia monitors, but the ProClip is still Brodit´s main product.

Read more information about Brodit.
Visit Brodit web-site.