Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Jeep Wrangler 2003-2006 LHD
Brodit ProClip Mount (Brodit 830520)

ProClip for Jeep Wrangler 2003-2006 LHD
Reference ID: 6439.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 830520.
Fitment: Jeep Wrangler 2003-2006 LHD For All Countries.
Placement: Console mount.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

A ProClip that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.

This Product is also Compatible with the Following 269 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Jeep Wrangler:

Attention! Read all instructions before attaching the ProClip.

1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ProClip.

2. Hook the upper part of the ProClip, with adhesive tape, over the edge of the console into the gap at pos. 1. Hook the long lower part of the ProClip, with angle, under the edge of the console at position 2.
3. Press the upper and the lower part of the ProClip towards each other until the face of the ProClip has a flat/horizontal position. Tighten the nut with the enclosed tool. Place the enclosed cap over the nut.

4. Place the ProClip face plate over the ProClip so the holes match. Note that the position of the face plate changes depending on which way you hold the face plate. Screw the face plate onto the ProClip by using the enclosed screws. The ProClip is in place.

In most vehicles the adjustable ProClip is placed on the right side of the
console. Howerever, in some vehicles it is placed on the left side of the console and in a few cases there are different solutions e.i. mounting in the cup holder. When you choose the location for the ProClip it is important to make sure that the location spot will give the ProClip the necessary hold/grip onto the console and that it will not block the airbag.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Jeep Wrangler 2003-2006 LHD:

Part No: Brodit 653945
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2007-2010 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853224
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2003-2006 LHD for all countries
Placement: Angled mount
Price: £ 17.76
Description:
ONLY for automatic gear shift.
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 852382
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 1997-2002 LHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853223
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2003-2006 LHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 653223
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2003-2006 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 652382
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 1997-2002 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 654548
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2011-2014 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810926
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Jeep Wrangler 2007-2010 RHD for all countries
Placement: Headrest mount
Price: £ 104.98
Description:
With flexible arm. For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 213499
Product Type: Brodit Mounting Bracket
Product Fits: Jeep Wrangler 2011-2017 LHD for USA
Placement: Center mount, Extra strength mounting platform.
Price: £ 17.76
Technical Information:
Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.
More Info
Part No: Brodit 853945
Product Type: Brodit ProClip Mount
Product Fits: Jeep Wrangler 2007-2010 LHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Catalog Pages:  [ 1 ] 2  3  4  5  6  7  8  9  10 ...11 Next >
Additional Information

Additional Information:
Why Buying «ProClip for Jeep Wrangler 2003-2006 LHD» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...