Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Land Rover Discovery 3 2005-2009 RHD
Brodit ProClip Mount (Brodit 653572)

ProClip for Land Rover Discovery 3 2005-2009 RHD
Reference ID: 15915.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 653572.
Fitment: Land Rover Discovery 3 2005-2009 RHD For All Countries.
Placement: Center mount.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following 2 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Land Rover Discovery 3:

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Press the thick ends of the enclosed gap openers into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Place the gap openers about 10 cm apart. Peel off the adhesive tape covers on the ProClip.

2. Press the angled edge on the left part of the ProClip into the gap between the control panel and the surrounding frame.

3. Press forwards on the right side of the ProClip so the angled right edge hooks into the gap between the gap openers. Press until you hear/fell it snaps into place. Pull out the gap openers.

4. The ProClip is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Land Rover Discovery 3 2005-2009 RHD:

Part No: Brodit 653573
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2009 RHD for all countries
Placement: Angled mount
Price: £ 17.76
Description:
NOT for wood grain panel.
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853572
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2009 LHD for Europa
Placement: Center mount
Price: £ 17.76
Description:
NOT for wood grain panel.
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 653573
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2008 RHD for all countries
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 653572
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2008 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853573
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2009 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Description:
NOT for wood grain panel.
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Land Rover Discovery 3 2005-2009 RHD for all countries
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 853572
Product Type: Brodit ProClip Mount
Product Fits: Land Rover Discovery 3 2005-2008 LHD for Europa
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810520
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Land Rover Discovery 3 2005-2009 RHD for all countries
Placement: Headrest mount
Price: £ 77.01
Description:
For Apple iPad.
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm
More Info
Part No: Brodit 810926
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Land Rover Discovery 3 2005-2009 RHD for all countries
Placement: Headrest mount
Price: £ 104.98
Description:
With flexible arm. For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Land Rover Discovery 3 2005-2009 RHD for all countries
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Why Buying «ProClip for Land Rover Discovery 3 2005-2009 RHD» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...