Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Microsoft Surface PRO
Brodit Car Cradle Holder With Lock (Brodit 539491)

Holder With Lock for Microsoft Surface PRO
Reference ID: 46294.
Product Type: Brodit Car Cradle Holder With Lock.
Part Number: Brodit 539491.
Fitment: Microsoft Surface PRO For All Countries.

Price:

£ 65.94
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

This holder is to be used when you want to secure your Microsoft Surface and still have it easy accessable.

The holder is perfect for use in stores, at exhibitions and any place where you want to use your device without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Car Cradle Holder With Lock also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder With Lock for Microsoft Surface PRO:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.

2. Slide the device sideways carefully into the holder. Press the lock sideways onto the right part of the holder. Press the button to lock.

3. Use the enclosed key to open the lock. Remove the lock by slidning it sideways away from the holder. Slide the device sideways carefully out of the holder.

4. The holder is in place. Switch between portrait and landscape mode by turning the holder into desired position.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Microsoft Surface PRO:

Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Microsoft Surface PRO for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 539587
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Microsoft Surface PRO for all countries
Placement:
Price: £ 65.94
Description:
Passive holder. 2 keys included. For Incipio Capture Case.
Technical Information:
This holder is to be used when you want to secure your Surfce Pro and still have it easy accessable.
 
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Surface Pro without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder you need the key, two keys are included.  The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 541491
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: Microsoft Surface PRO for all countries
Placement:
Price: £ 54.21
Description:
Passive holder with tilt swivel. With spring stud locking.
Technical Information:
This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable.

The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Additional Information

Additional Information:
Multimedia in Vehicles.

Headrest monitor mount with flexible arm.
The headrest monitor mount with flexible arm allows you to adjust the monitor just the way you want: higher, lower, angle it, tilt it...

Monitor mount between seats.
A car specific monitor mount with tilt swivel. The monitor will be placed between the front seats, giving the back seat passengers a perfect view.

Holder for MP3-players.
Keep your MP3-player in a holder in the vehicle, and you will always have it in easy reach. The unit can be adjusted in order to avoid light reflection.

Headrest monitor mount.
Will be attached a front seat's headrest.

Mounting solutions for monitors in vehicles. The monitor's position gives the back seat passengers a perfect view. You can take the monitor with you when leaving the vehicle.

Many Alternatives.
There are monitor mounts to suit various positions, giving you options for positioning and making several different installations in the vehicle.

Does not Damage the Interior.
The interior of the vehicle will not be damaged as no drilling holes is required and you do not need to dismantle the dashboard.

Take the Monitor with You.
You can take the monitor with you when you leave the vehicle. It is easy to put the monitor in place, and to remove it from the mount.

With Tilt Swivel.
You can adjust the monitor in order to avoid light reflection in the screen.

Saves Time.
The monitor mounts save you time. Installation is easy, with no special tools required. Detailed instructions with pictures are included.

High Quality.
The monitor mounts have a firm fit. The between seats monitor mounts are custom made for every vehicle model.