Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Mini One 2007-2011 RHD
Brodit ProClip Mount (Brodit 653979)

ProClip for Mini One 2007-2011 RHD
Reference ID: 33161.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 653979.
Fitment: Mini One 2007-2011 RHD For All Countries.
Placement: Angled mount, NOT for models with upper glove comp.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following 35 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Mini One:

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Peel off the adhesive tape covers on the ProClip. Press the curved edge on the upper part of the ProClip into the gap between the panel surrounding the air vent and the dashboard.

2. Flip the ProClip downward and press it forward so the upper curved edge hooks behind the panel surrounding the air vent. Hook the angled edge on the lower part of the ProClip under the edge of the dashboard.

3. Press upward on the lower part of the ProClip so the angled edge hooks properly under the edge and the adheaive tapes attach to the dashboard.

4. The ProClip is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Mini One 2007-2011 RHD:

Part No: Brodit 215103
Product Type: Brodit Mount With Tilt Swivel
Product Fits: TomTom One for all countries
Placement:
Price: £ 21.97
Technical Information:
More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 512116
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Nexus One for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 521524
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: HTC One for all countries
Placement:
Price: £ 64.09
Description:
With tilt swivel. With USB cable.
Technical Information:
The active holder charges your HTC One when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info
Part No: Brodit 511648
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: OnePlus One for all countries
Placement:
Price: £ 24.89
Technical Information:
When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 511524
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: HTC One for all countries
Placement:
Price: £ 24.89
Technical Information:
When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 654046
Product Type: Brodit ProClip Mount
Product Fits: Mini One 2007-2009 RHD for all countries
Placement: Angled mount, ONLY for models with upper glove com
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 513116
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Nexus One for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 510126
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Nexus One for all countries
Placement:
Price: £ 27.9
Description:
Padded.
Technical Information:
When keeping your mobile in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the mobile when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 215119
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: TomTom One for Europa
Placement:
Price: £ 50.48
Description:
With straight cable for fixed installation. 12/24 Volt, 2 A charger.
Technical Information:
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Size: 143x50x5mm.
More Info
Part No: Brodit 511126
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Nexus One for all countries
Placement:
Price: £ 24.89
Description:
Padded.
Technical Information:
When keeping your unit in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the unit when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2  3  4  5  6 
Additional Information

Additional Information:
What is Brodit ProClip?

Here are the primary descriptions of what the Brodit ProClip is:

1) Brodit ProClips provide a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

2) Brodit ProClips provide a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

3) The ProClip is a mounting bracket for the vehicle´s dashboard. Onto the Proclip you can install for example a holder for your mobile phone or PDA or a handsfree set. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

4) The ProClip brackets give you a safe and easy way to mount your holders and cradles without damaging your cars interior. Installation is very simple and only takes a few seconds without the need for any screws or other fixings, you just simply clip the ProClip Bracket on to your car's dashboard, and removal is just as easy and leaves no marks whatsoever on your dashboard.

The main benefits of the ProClip Platform are:

1) No drilling and no dashboard modification required at all. You insert the ProClip into existing car dashboard's holes.

2) The installation is easy and safe. Insert or remove the ProClip quick and easy.

3) Removal does not leave any marks.

Read more about Brodit ProClip Platform.