Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Siemens SX66
Brodit Car Cradle Holder For Cable Attachment (Brodit 846612)

Holder For Cable Attachment for Siemens SX66
Reference ID: 8001.
Product Type: Brodit Car Cradle Holder For Cable Attachment.
Part Number: Brodit 846612.
Fitment: Siemens SX66 For All Countries.

Price:

£ 48.98
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following 8 Devices :

The drop-down list below provides a list of other devices which this Car Cradle Holder For Cable Attachment also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder For Cable Attachment for Siemens SX66:

Attention! Please read all of the instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the holder with the fronside downwards. Press the buttons on both sides on the connector, and place the connector into the opening in the holder. The arrow marks on the connector facing down, so you can't see them. Place the back piece over the connector so the holes match.

2. Screw the back piece into place with the enclosed screws. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part. The holder is in place.

4. The holder with cable in place, with PDA.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Siemens SX66:

Part No: Brodit 971612
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 92.38
Description:
With tilt swivel, with Molex adapter system for GPS and data transfer. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848612
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 849612
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 65.92
Description:
With built in connector. Fits cable 942040 (not original charging cable). O2 XDA IIs/Qtek 9090 etc.
Technical Information:
Fits Brodit charging cable 942040, and all cables for the previsous PDA-models, e.g. Qtek 1010/2020, T-Mobile MDA/MDA II etc.
(Does not fit original charging cable)
More Info
Part No: Brodit 845612
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 55.62
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 968612
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 942040
Product Type: Brodit Charging Cable
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 15.54
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 979612
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 38.5
Description:
12-24 Volt. Straight cable for fixed installation, with TX, RX, Ground. O2 XDA IIs, Qtek 9090, T-Mobile MDA III.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 847612
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 48.98
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 994612
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 146.29
Description:
Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Technical Information:
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.

12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 992612
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: Siemens SX66 for all countries
Placement:
Price: £ 138.58
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt. Qtek 9090/XDA III/MDA III
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Why Buying «Holder For Cable Attachment for Siemens SX66» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...