Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Zebra ET50 10.1
Brodit Passive Car Cradle Holder (Brodit 511914)

Brodit Passive Car Kit Holder Mount for Zebra ET50 10.1
Reference ID: 66148.
Product Type: Brodit Passive Car Cradle Holder.
Part Number: Brodit 511914.
Fitment: Zebra ET50 10.1 For All Countries.

Price:

£ 143.69
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

This holder is the perfect choice when you want to have your device firmly in place within easy reach. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder is made of extra strong plastic. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
 
Dimensions: 325 x 216 x 90 mm (W x H x D mm)
Weight: 932 g

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder for Zebra ET50 10.1:

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Place the holder onto the desired position and screw into place with the enclosed screws.
 
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forward so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.
 
3. The holder is in place.
 
4. The holder is in place with device.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Zebra ET50 10.1:

Part No: Brodit 941017
Product Type: Brodit Charging Cable
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 62.61
Description:
Plugs directly into your Cigarette lighter, straight cable, with DC power plug. 12V out. 3A. 12V in.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length (+ 6,5 cm cig-plug): 70 cm from DC-plug to box, 10 cm box, 108 cm from box to cig-plug.
Weight: 104 g.
More Info
Part No: Brodit 941012
Product Type: Brodit Charging Cable
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 62.61
Description:
Hard wire for fixed installation, with DC power plug. 12V out. 3A. 12V in.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 70 cm from DC power connector to box, 10 cm box, 290 cm from box to open ends.
Weight: 144 g
More Info
Part No: Brodit 550810
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 256.45
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.      
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info
Part No: Brodit 539902
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 225.38
Description:
With lock, 2 keys. Fits devices with rugged frame. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame ( NOT for expansion module/handstrap). The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.         
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info
Part No: Brodit 550888
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 322.3
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With USB and DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder has a USB connector for data connection.    
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info
Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 539892
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 305.62
Description:
With lock, 2 keys. Fits devices with rugged frame. With USB and DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame ( NOT for expansion module/handstrap). The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder has a USB connector for data connection.     
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info
Part No: Brodit 539960
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 334.75
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With USB and DC power connector (power supply NOT included). For 30 pin.
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 941017    Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.   
The holder includes a USB connector for Power & Data connectivity (Maximum current: 900mA @ 5Vdc)  

Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info
Part No: Brodit 941021
Product Type: Brodit Charging Cable
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 115.78
Description:
Hard wire for fixed installation, with DC power plug.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 74 cm from DC power connector to box, 10 cm box, 297 cm from box to open ends.
Weight: 147 g
 
Input voltage: 12 V, 2.7 A
Input Voltage: 24 V, 1.3 A
Output voltage: 12.6 V, 2,5 A
More Info
Additional Information

Additional Information:
Passive Holder for PDA.

The passive holder is the choice for you who want to have your PDA safely installed in the vehicle. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.